Concrete Contractor in Canton, MS - Driveways and Patios Explained Before the Pour
Brandon Concrete Company builds concrete driveways, patios, sidewalks, garage floors and foundations for homes and properties in Canton, MS. I'm the one who explains your options before anything gets poured, and our crew does the building.

- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
Canton homes, from the Square to newer lots
Most people around here know Canton by its Courthouse Square and the Greek Revival courthouse at its center, and the streets near it hold some of the older houses we work on here. Farther out, the calls usually come from newer houses on bigger lots, where people want a longer driveway, a patio off the back or a slab for a shop. It's much the same mix we see in Madison and Ridgeland.
That mix shapes the job. On the older streets a driveway is often narrow and tucked between houses, so getting the old concrete out and the truck in takes planning, while a long run on a newer lot means more ground to dig out and pack before any concrete shows up.
Concrete work we do for Canton properties
Concrete driveway building
When an older Canton driveway has cracked apart or sunk at the garage, we tear it out, pack a new base and pour a fresh slab.
Concrete patio construction
Behind newer Canton houses we often find loose dirt left from building, so we dig it out, pack the base and slope the patio away from the house.
Stamped concrete services
Stamped concrete, pressed with a brick or stone pattern while it's still wet, suits older Canton homes where a plain gray slab would look out of place.
Concrete sidewalk building
We replace front walks and side paths that have heaved into trip edges, pouring each section on a packed base so it sits level with the next one.
Garage floor concrete
A cracked or stained garage floor in an older Canton house can come out and go back in thick enough for your vehicles, with a smooth, easy-to-sweep finish.
Decorative concrete
Decorative concrete adds color, borders or exposed stone, a good choice when you want new work to sit well beside an older house near Canton's downtown streets.
Concrete retaining walls
Where a Canton yard slopes toward the house or a driveway cuts into a bank, a concrete retaining wall holds the dirt back and gives you level ground.
Concrete floor installation
For a shop, barn or new room on a bigger Canton lot, we pour an interior concrete floor on a packed base and finish it smooth.
Concrete pool decks
Around a Canton pool we pour a deck with a broom finish, a light brushed texture that gives wet feet grip, sloped so splash water drains off.
Concrete steps construction
Front steps on older Canton houses often crack or pull away from the porch, so we form and pour new ones with even, comfortable rises.
Slab foundation building
For a new house, garage or addition in Canton, we build the slab foundation on packed ground, with rebar, steel bars inside that hold the concrete together.
Foundation installation
When you're building on a Canton lot, we lay out, form and pour the foundation your house or addition stands on, after checking where water runs.
Concrete parking lot building
Canton shops, churches and offices call us for parking lots, which need a deeper base and thicker slab than a home driveway because of the traffic.
Concrete footings
Footings are the buried concrete under walls, porches and additions, and on Canton lots we dig them down to firm ground so the weight rests on something solid.
Foundation raising
If a slab or older foundation in Canton has dropped at a corner, we look for what caused it before we raise it back toward level.
Concrete cutting
We saw-cut old concrete in Canton for a new doorway, a plumbing repair or a clean edge where new slab meets old, keeping dust and damage down.
Get a free on-site concrete quote in Canton
Send the form and we'll get back to you within one business day to set a time. I'll come out, walk the site with you and explain what goes into the quote, and there's no pressure to book.
Call (601) 591-9020- Based in
- Brandon, MS 39042
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 7 AM–9 PM
What working in Canton means for your concrete job
The City of Canton sets the land development rules inside its city limits, and one of them is a site grading permit for work that disturbs the ground on a lot. Tearing out a driveway and digging out a base is ground work, so whether yours needs that permit is the city's call, and when it does, your start date waits on it. We're licensed and insured, and when your job needs the permit, we handle it as your licensed contractor so it isn't left on you.
We drive up from Brandon for Canton jobs, so I plan each pour so the concrete truck and the crew show up together, because concrete that sits waiting in the truck stiffens and is harder to finish well. It's the same planning we do out east in Forest. Your price mostly moves with the size of the slab, how much old concrete comes out, how deep the base has to go and the finish you pick, and the schedule turns on the permit, a dry day to pour and the curing time, the days a slab needs to harden before it takes weight. I'll give you the figures for your own job when I come out and walk it.
Canton slabs that crack, sink or hold water
Most of the cracked and sinking concrete we tear out here failed underneath, not on top. The subgrade, the ground the slab sits on, was raked level instead of dug out and packed, so the dirt settled and the slab went down with it. That base is the first thing a tight budget cuts, because nobody sees it on day one, and it's the one place I won't trim, since a nice finish on a bad base just cracks prettier. We dig to firm ground, pack the base and cut control joints, shallow grooves that give the slab a straight place to crack instead of a random one, before it has a chance to crack on its own.
Water is the other thing I look at, because a slab that falls toward the house sends rain to your foundation or leaves a puddle at the garage door. Before we set any forms, I check where the water runs across your yard and slope the new concrete to carry it away.
What happens after you call us about a Canton job
Here's how a Canton job runs from your side, from the first call to the day I walk the finished concrete with you.
Call or send us a message
Call (601) 591-9020 or send the form with a few lines about what you're picturing. We'll get back to you and set a time for me to come out.
Walk the site with me
I come out myself to look at the old concrete, the ground and where the water runs, and to hear what you want. Then I write the quote out so you can see what's included and what isn't before you decide anything.
Settle permits, then build it
We settle the permit question with you before any work starts. Then our crew does the prep, forming, pouring and finishing, and I'm on site checking the work as it goes.
Walk the finished job together
At the end I walk the finished concrete with you and answer whatever questions you've got. I'll also tell you when it's ready for feet and when it's ready for your car, since it's still curing.
Questions about concrete work in Canton, MS
Call (601) 591-9020Why do concrete driveway quotes in Canton, MS vary so much?
Quotes usually differ because of what's under the slab and what's left out, not the concrete itself. Some include tearing out the old slab, digging out and packing the base and cutting joints, and some quietly don't, so ask every contractor to tell you what's in the number. When I come out, I walk the job with you and explain what goes into ours.
Do I need a city permit to dig out for a driveway or patio in Canton?
You might, because the City of Canton issues site grading permits for land disturbance inside its city limits, and digging out for a slab disturbs the ground. The rules are in the city's land development ordinance, which you can read online before you plan anything. We sort out with you whether your job needs it before we start.
Does my house in Canton need a Certificate of Appropriateness for new concrete?
Only if your property is designated under the city's historic preservation chapter, because that's the only place this city approval applies. If yours is, find out from the City of Canton which work needs the approval before the project starts. I'd rather we know that before I write your quote, so tell me early if you think it applies.
How do I know if my house is in Canton's Courthouse Square historic district?
The Canton Courthouse Square District is on the National Register of Historic Places, and that listing covers only the properties within the district, not the whole city. Being near the Square doesn't by itself decide whether the city's historic approval applies to your job, since that turns on designation under the city's chapter, so check with the city if your house is close by.
What is the best way to keep a new concrete patio from cracking?
The best way is a dug-out, packed base, joints cut early, a pour at the right time of day and a slab left alone until it's cured. A pour in midday heat can leave a weak, dusty top later, so we plan pours to avoid it. No concrete is crack-proof, but those steps decide whether a crack runs where we chose or wherever it likes.
Does a concrete contractor in Brandon, MS work in Canton?
Yes, we're a concrete contractor based in Brandon, MS, and we work across the cities around it, Canton among them, along with Jackson, Pearl, Flowood, Madison and more. I do the estimate visits myself, so the person who explains your Canton job is the same one checking the crew's work as it goes.
Brandon, MS
Talk through your Canton concrete job
Calling before you settle on a design gives us time to sort out any grading or historic question with the city, so it doesn't hold up your pour.




