Concrete floor installation in Brandon MS - a dry, even slab that wears well
Old slab cracked, dusty or ruining the flooring on top? We pour a new concrete floor built to stay dry and wear evenly.
- Licensed and insured.
- Free quotes on site.
- Replies within 1 business day.
What goes into a new concrete floor in Brandon?
Concrete floor installation in Brandon means our crew pours a new slab, then finishes, joints and cures it so you end up with a hard, even floor you can use as it is or cover with flooring.
Most people who call about a floor are working on a shop, a converted room, an addition or a building where the old slab has given out, and some need a garage floor poured too. The price mostly comes down to the size of the room, how much digging and base work the ground needs, how easy it is to get concrete to the spot and whether flooring or a coating is going on top. The schedule mostly comes down to the weather on pour day, the permit question and how long the slab has to cure before anything covers it. I'll give you your own figure in a written quote once I've seen the site, with each line explained so you know what you're paying for.
How do you know your concrete floor needs replacing?
Cracks that keep growing
A crack that gets wider or one side sitting higher than the other usually means the ground under the slab moved or the base was never packed. The longer it goes, the more water gets in and the more the edges break up, so a patch turns into a full replacement.
Flooring lifting or smelling musty
Tile popping loose, vinyl bubbling or a damp smell over a concrete floor usually points to moisture coming up through the slab. Putting new flooring over the same slab usually brings the same failure back.
A dusty, chalky surface
Powder on your shoes or a top that flakes off means the surface layer is weak, often because it was finished at the wrong time or dried out too fast. It keeps wearing down, and sweeping only uncovers more of it.
Low spots that hold water
Puddles that sit in the same place after you wash the floor mean the slab sank or was finished uneven. Standing water stains the concrete and works its way toward the walls.
How we handle concrete floor installation
The first thing I ask is what's going on top, because if it's flooring or a coating, keeping moisture down starts with the layer under the concrete and that has to be planned before the pour. Then our crew digs out and packs the subgrade, which is the ground the slab sits on, sets the forms and places the concrete. We time the finishing to how the concrete is setting that day instead of a clock, cut control joints, which are straight grooves that give the slab a place to crack where nobody will notice, and then cure it, keeping it from drying too fast so the top comes out hard. If the budget gets tight, I'll help you trim somewhere other than the base, because nobody sees the base on day one and it's the part that decides whether your floor stays flat.
A new floor often touches the work around it. When the slab changes the height at a door, we can build concrete steps to match, and if the room opens onto a pool, we also pour concrete pool decks so the whole area is planned together.
A floor that will be covered
This suits rooms getting tile, wood, vinyl or a coating. Moisture control under the slab gets the most attention here, because that's what decides whether the flooring stays put.
A floor left as concrete
This suits shops, storage rooms and work spaces where the concrete is the finished floor. An even top and well-placed joints do most of the work, and we still plan the layer underneath for a dry room.
Replacing an old slab
This suits a floor that has cracked, sunk or ruined the flooring on top. We break out the old concrete, find out why it failed and fix the ground before the new pour.
Get a written quote for your new concrete floor
Send the room size, what's on the floor now and what you plan to put over it. We reply within one business day, I come out for a free quote on site, and there's no pressure to book.
Call (601) 591-9020- Based in
- Brandon, MS 39042
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 7 AM–9 PM
What happens after you call about a concrete floor in Brandon?
Here's how a floor job runs from your first call to the final walk-through, so you know who you'll be talking to at each step.
Call or send a message
Call (601) 591-9020 or use the form, and we'll set a time for me to come see the room. It helps to have the size and the floor covering you have in mind.
Walk the site together
I look at the ground, the access and the room, hear what you want, then write the quote so you can see what's included and what isn't. We settle the permit question together before any work starts.
Our crew builds the floor
Our crew does the prep, forming, pouring and finishing. Pour day depends on the weather, so if rain or heat moves it, we'll tell you.
Walk the finished floor
When it's done, I walk the floor with you and answer whatever questions you've got. I'll also tell you when it's ready for flooring and heavier use.
Why Brandon owners call us for a new concrete floor
The person who quotes it checks it
I do the estimate visits myself, and I'm on site checking the crew's work as it goes. The person who explained your quote is the one making sure it gets built that way.
Every line of the quote explained
I started out selling concrete work at kitchen tables, then learned the trade on crews before opening our business in 2023. A lot of bad concrete starts with a quote nobody explained, and when you know why each step is there, you can hold us to it.
Licensed and insured, worth checking
We're licensed and insured, and the Mississippi State Board of Contractors is where contractors here are licensed. The city's summary of state law says anyone doing a remodel job over $10,000.00 needs a residential builder's license or a remodeler's license, so ask any crew you're considering which one they hold.
What matters most on a floor is the part you'll never see again once the concrete covers it, so bring me every question you have about it. Get in touch and I'll come take a look.
Concrete floors, permits and soil in Brandon
The City of Brandon requires a permit whenever someone proposes to build, enlarge, alter, repair, move or demolish a structure, or change how it's used, and whether your floor falls under that depends on what the floor is part of. The city's community development department is where that gets answered. We sort it out with you before work starts, and when your job needs a permit, we handle it as your licensed contractor so it isn't left on you.
Part of Rankin County sits on the Yazoo Clay belt, and that clay can swell enough to lift tons of concrete, then shrink as it dries and pull a slab down, rarely evenly. County soil maps rate most of Rankin County low for shrink-swell, with 19% rated high, so that's county data and not a verdict on your lot. It's why I look at the ground at the estimate and why we dig out and pack the base instead of raking it level. We see the same mix of ground on jobs in Pearl and Flowood, and we prepare the base the same way there.
Questions about concrete floors in Brandon
Call (601) 591-9020How much does a new concrete floor cost in Brandon, MS?
A concrete slab in the Jackson metro area usually costs about $5 to $11 per square foot, before any staining or stamping. Where your floor lands in that range depends on the size, how much base work the ground needs, access for the truck and what's going on top. I'll write out your own figure at the site visit.
Can I pull my own building permit for a concrete job in Brandon?
You can, but the city warns that pulling it yourself makes you the general contractor. That means you're personally liable for accidents on the job, so it's worth settling who applies before work starts, and when a permit is needed we apply as your licensed contractor.
How long before I can walk on a new concrete floor?
A new slab should be walkable within 48 hours, and it takes about a month to fully cure. Waiting a week before heavier loads go on it is a safe choice, so plan furniture and move-in around that first week.
Why does the vapor retarder under a concrete floor matter?
It holds back water vapor moving up through the slab, which protects the flooring, coatings and the room above it. Even small holes in it can sharply raise the vapor coming through, which can cause flooring failures and delays in laying flooring, and it protects best when it sits in direct contact with the slab.
What causes a new concrete floor to crack or wear out early?
Bad timing on the finishing, jointing and curing is a common cause, along with a base that settles. Getting the timing wrong can lead to cracking, a surface that wears fast, high and low spots and poor drainage, so the crew's pace on pour day matters as much as the concrete itself.
How do I plan a concrete floor pour in Mississippi summer heat?
Ask your contractor how they'll handle a hot-weather pour, because precautions are generally recommended for placing concrete in the heat, though the requirements vary from place to place. Bring it up at the estimate and I'll tell you how it would work on your job.
Related concrete work around a new floor
Concrete pool decks
When the new floor opens onto a pool, the deck around the water needs the same base work, plus a surface that sheds water away from the house.
Concrete steps construction
A new floor can change the height at a doorway, and new steps give you an even rise there instead of an awkward first step.
Service areas for concrete floors around Brandon
Brandon Concrete Company is based in Brandon, Mississippi, and we pour floors across the cities around it, including Jackson and Madison. These are the 11 cities with their own page, and they aren't the only places we work.
Brandon, MS
Plan your new concrete floor with us
Call before you set a date with your flooring installer, so the slab's curing time fits your schedule instead of getting rushed.